Loading... Please wait...

Our Newsletter


New England Classic Paypal

Specifications - Classic Beadboard Wainscoting System


Classic Beadboard: Introduction | Details | Dimensions | Specifications | Stairs | Brochure | Other Styles
General product Information: Installation | Project Ideas | Environmental Story | FAQ | Warranty


Product Specifications

PART 1.0 - GENERAL

1.1 DESCRIPTION

A. Classic Beadboard® Systems shall be New England Classic® Classic Beadboard® Systems manufactured by New England Classic®.

1.2 SUBMITTALS

A. Submit manufacturer's literature and installation instructions to determine layout requirements

1.3 DELIVERY, STORAGE AND HANDLING

A. Delivery - the Classic Beadboard® Systems shall be delivered to the job site in the manufacturer's original packaging with manufacturer's identification intact and legible.

B. Storage & handling - the Classic Beadboard® Systems shall be stored and handled in such a way to protect against contact with water, exposure to weather, breakage and damage. Do not store directly on concrete without a plastic sheet as a moisture barrier.

1.4 LIMITATIONS

A. Moisture Conditions - the Classic Beadboard® Systems shall not be used in wet or damp areas.

B. Temperature conditions - the Classic Beadboard® Systems shall not be used in contact with surfaces where temperatures exceed 120 degrees F.

PART 2.0 - PRODUCTS

2.1 ACCEPTABLE MANUFACTURER

New England Classic®, 4145 Parkway Drive, Florence, AL 35630

2.2 MATERIALS

A. Substrate shall be industrial grade class 3; or moisture resistant MDF, product class MD - that conform with ANSI A208.2-1994. Substrate may be sprayed with a fire retardant finish to achieve a class 1 fire rating.

B. Adhesive for bonding veneers to substrate shall be PVA, EVA, or PUR type adhesive.

C. Paintable veneer shall be recoatable cellulose film, 80 gm. weight.

2.3 COMPONENTS

A. Beadboard panel,
8-5/32"x 23"x 3/8" thick
8-5/32"x 31"x 3/8" thick
8-5/32"x 60"x 3/8" thick
8-5/32"x 95"x 3/8" thick

B. cap, 1-1/2"x1-1/4"x 96"long

C. rail, 5/8" x 4"x 96" long

D. base rail, 5/8" x 8" x 96" long

E. shoe, 1/2" x 1-1/4" x 96" long

PART 3.0 EXECUTION

3.1 INSTALLATION

A. Install per the manufacturer's recommendations using the instructions provided with the product.

3.2 WARRANTY

A. Manufacturer shall furnish a five-year warranty against defects in material, de-lamination and workmanship for parts only. Removal labor, reinstallation labor and freight are not included.

3.3 MATERIALS ACCEPTANCES

A. City of New York MEA 190-99-M